This solid flywheel requires 10 Ford flywheel bolts part number:

3C3Z 6379-CA

These are the original bolts that were used on 2005 and up trucks that were built with the solid flywheel. If you are replacing a dual mass flywheel with the solid flywheel, the bolts must be replaced. 

Bolt tightening pattern:

Following the pattern, tighten to 20 lb-ft or 27Nm, and then to 69 lb-ft or 94Nm.

PLEASE REFER TO FACTORY SERVICE MANUALS FOR DETAILED APPLICATION SPECIFIC PROCEDURES.

This bulletin is to assist in the safe and effective servicing of this application. Transmissions, transaxles and transfer cases are heavy and their safe removal and replacement requires the use of proper tools, equipment and procedures to prevent injury and damage. Always read and follow instruction bulletins and factory service mauals for detailed clutch servicing procedures.

Bulletins and any additional information:

www.clutchtechsupport.com

IB221 06/23/2015