This solid flywheel option is designed to replae the Original Equipment Dual Mass Flywheel and it's matching components. None of the components should be used separetly or with the Original Equipment Clutch, Pressure Plate or Flywheel.

NOTE: This flywheel will only fit on the crankshaft in one position.

NOTE: When replacing the Original Equipment components, use only the bolts supplied with this kit.

Flywheel Botl Torque:

Tighten the bolts in a star pattern. Torque the flywheel to crankshaft bolts to 81 lb-ft or 110 Nm.

Pressure Plate Bolt Torque:

Tighten the bolts using a star pattern 3/4 to 1 turn per pattern.

Torque to 14 lb-ft or 18 Nm. 

PLEASE REFER TO FACTORY SERVICE MANUALS FOR DETAILED APPLICATION SPECIFIC PROCEDURES.

This bulletin is to assist in the safe and effective servicing of this application. Transmissions, transaxles and transfer cases are heavy and their safe removal and replacement requires the use of proper tools, equipment and procedures to prevent injury and damage. Always read and follow instruction bulletins and factory service manuals for detailed clutch servicing procedures.

Bulletins and any additional information:

www.clutchtechsupport.com

IB263 06/25/2015