This solid flywheel option is designed to replace the Original Equipment Dual Mass FLywheel and its matching components. None of the components should be used separately or with the Original Equipment Clutch, Pressure Plate or Flywheel. When replacing the Original Equipment components, use only the bolts supplied with this kit.

Flywheel bolt torque:

Tighten the bolts in a star pattern. Torque the flywheel to crankshaft bolts to 88 lb-ft or 120 Nm.

Pressure Plate bolt torque:

Tighten the pressure plate bolts using a star pattern 3/4 to 1 turn per pattern.

For grade 8.8 bolts torque to 17 lb-ft or 24 Nm. 

For grade 10.9 bolts torque to 25 lb-ft or 34 Nm.

PLEASE REFER TO FACTORY SERVICE MANUALS FOR DETAILED APPLICATION SPECIFIC PROCEDURES.

This bulletin is to assist in the safe and effective servicing of this application. Transmissions, transaxles and transfer cases are heavy and their safe removal and replacement requires the use of proper tools, equipment and procedures to prevent injury and damage. Always read and follow instruction bulletins and factory service manuals for detailed clutch servicing procedures.

Bulletins and any additional information:

www.clutchtechsupport.com

IB249 06/15/2015